Notifications
Clear all
Topic starter
02/08/2021 6:32 am
Hi,
From yesterday I was try to load STL. file to SC3D it will go into repair for about 30min. Than clear the load screen. I try STL that I loaded before and the work on Canvas, it just seem to be stuck in the repair mode all the time and times out the load process. Hope someone can reset the SC3D program so the load mode works.
Best regards,
Carlos
04/08/2021 8:03 pm
Ditto for me. Nothing loads. Tried several different models. Testing the new flat and hole functionality with attached model (simple slab with holes), but it gets stuck on repairing. Models I have previously loaded get stuck on repairing...
04/08/2021 9:01 pm
It looks like .stl files previously exported from SC3D as .obj will load. I converted the slab with holes model attached in the last post to .obj and it did NOT load.
Topic starter
06/08/2021 9:06 am
Thank for the fast reply, I tested today and it working find. Maybe they were upgrading the server or maintenance on the server on the day I was having issue load files to SC3D.
Best regards,
Carlos