Notifications
Clear all
Retractable purge mechanism
33
Posts
8
Users
1
Likes
72.7 K
Views
03/09/2019 3:34 pm
[postquote quote=563][/postquote]
The z bearing holder is different to the original prusa ones it looks like this
Thanks Kerry
Topic starter
03/09/2019 3:49 pm
[postquote quote=588][/postquote]
That may stick out too far. It's difficult to tell from the image alone. Do you have a 3D model of it?
14/09/2019 1:40 pm
My corexy alpha setup (with servo)
Topic starter
14/09/2019 8:30 pm
Very nice !
15/09/2019 2:59 pm
I dont have enough space for the full tool, and dont have any ideas how to make back-forth part works in 40mm instead of 80
Topic starter
16/09/2019 4:02 pm
[postquote quote=618][/postquote]
Please provide more details so we can help solve the issue. Thanks
24/09/2019 5:08 pm
[postquote quote=589][/postquote]
Sorry for the delay responding the file is attached
24/09/2019 7:46 pm
I seem to have lost the ability to post here. But, here is my bracket to mount the purge device on the Geeetech Printers currently in production.
24/09/2019 7:46 pm
I seem to have lost the ability to post here. But, here is my bracket to mount the purge device on the Geeetech Printers currently in production.
24/09/2019 7:49 pm
Grrrr. This ism frustrating just attempting to share an STL file for others to use.
Topic starter
24/09/2019 8:13 pm
[postquote quote=639][/postquote]
What is the issue you are having? I see your post but there is no file attached. I think the uploading is working I just tried it.
24/09/2019 11:49 pm
It has said that your server is down to just locking up. Here is the file again.
24/09/2019 11:49 pm
Dang, this time it worked
Topic starter
24/09/2019 11:52 pm
[postquote quote=649][/postquote]
And that is one of the issues we've been working on. But at least it's working for the time being 😉