Printing blob too f...
 
Notifications
Clear all

[Solved] Printing blob too far forward on MK3S+

7 Posts
5 Users
5 Likes
319 Views
David van der Bokke
(@dvanderb)
Member
Joined: 8 months ago
Posts: 6
Topic starter  

I have a Prusa MK3S+ with the stock extruder and it seems like my blob is printing too far forward on the push pin top so the mechanism never hits the blob to push it out.  Picture attached. Any advice appreciated.


Quote
BigBrain3D
(@bigbrain3d)
Supreme moderator Admin
Joined: 3 years ago
Posts: 353
 

Hi @dvanderb
It looks like, for some reason, the nozzle is more forward than expected.
I've attached a couple right side bracket variations. 2 and 4 mm.
They will move the RPM toward the front of the printer.
Please let me know if either fixes the issue.


Garry Jones reacted
ReplyQuote
BigBrain3D
(@bigbrain3d)
Supreme moderator Admin
Joined: 3 years ago
Posts: 353
 

@dvanderb

2mm and 4mm


Garry Jones reacted
ReplyQuote
David van der Bokke
(@dvanderb)
Member
Joined: 8 months ago
Posts: 6
Topic starter  

Thanks. It may take a few days but I will give it a try.


Garry Jones reacted
ReplyQuote
David van der Bokke
(@dvanderb)
Member
Joined: 8 months ago
Posts: 6
Topic starter  

I am happy to report that the 2mm variation solved my issue and I was able to perform 5 successful purges in a row(the blob actually ejected on the first strike each time).


Garry Jones reacted
ReplyQuote
David van der Bokke
(@dvanderb)
Member
Joined: 8 months ago
Posts: 6
Topic starter  

I am happy to report that the 2mm variation solved my issue and I was able to perform 5 successful purges in a row(the blob actually ejected on the first strike each time).


BigBrain3D reacted
ReplyQuote
bustoges
(@bustoges)
Member
Joined: 1 month ago
Posts: 1
 

hello 


ReplyQuote
Share: