Notifications
Clear all
The Swapper3D
8
Posts
2
Users
2
Likes
103
Views
Topic starter
02/09/2023 8:45 pm
When you download the print file folders from Google Drive the step and stl parts are not on the same revision level.
03/09/2023 4:22 pm
Yes, it seems that some step files were overlooked with the last stl updates. Once our move is complete after Sep 11th we'll update the files. For now, our design machine is stuck in a shipping container...
Topic starter
14/09/2023 11:40 pm
@bigbrain3d If you have some spare time after updating the individual STL/STEP files, please also consider updating the big STEP assembly file for an overview of all changes. The version provided at the moment (Rev. C from 28th of July) has some glitches (see attached picture).
When you import it in Fusion 360 the orientation of the whole assembly is rotated (smallest problem) and not all parts are positioned correctly (big problem) 🤔
The pictures don't represent all errors. It's just an overview of the most obvious ones I could find immediately.
Topic starter
14/09/2023 11:49 pm
@bigbrain3d "Fun fact" ... this also happens when you import the STEP assembly in PrusaSlicer. There are the same part offsets.
So Fusion 360 is not the cause for this.
15/09/2023 12:30 am
@bigbrain3d If you have some spare time after updating the individual STL/STEP files, please also consider updating the big STEP assembly file for an overview of all changes. The version provided at the moment (Rev. C from 28th of July) has some glitches (see attached picture).
When you import it in Fusion 360 the orientation of the whole assembly is rotated (smallest problem) and not all parts are positioned correctly (big problem) 🤔
The pictures don't represent all errors. It's just an overview of the most obvious ones I could find immediately.
noted, thanks
ExtruderCat reacted