noted, thanks

@extrudercat that's sounds really interesting. Please let me know when you've checked in your changes, I'd love to review and see how you solved those...

@extrudercat Can you suggest the steps that you took, where and how much you filed, to get it to be smooth?

@extrudercat at this point I would remove the TR servo and place it back in the template. Then test again. If the start angle of the servo doesn't poi...

add fan wire step was updated here palette WA servo optional note added

@extrudercat Your suggestions are definitely worth exploring. However, for now we need to get you up and running with the parts you have on hand. Have...

@lee-lemieux Our swapper is out of the container and we are back working on it. You can see the priority of the work we are doing now in this pinned p...

@extrudercat if you install the setup firmware and press the S button while on the TR setting, does the arm move in the same way? the S button should ...

@extrudercat there is a know issue mismatch between the uploaded octoprint and the firmware for the uno. It will be fixed next.

@extrudercat @sdee a note has been added to the manual that the WA is only for the palette. You should remove it and the bracket if not using a pal...

@extrudercat sometimes we forget to update the version number. The changes are in it though.

@extrudercat yes, only the palette needs it. Only the palette needs multiple cuts when changing the filament to remove the splice transition zone. MMU...

@3dzee, I tried to upload a jpg and png as Admin and as You. It worked both times. I think what is happening is that 'wordfence' looks at IP address a...

test PNG upload  test_picture_upload.png