Swapper3D™ Instructions

Congratulations on your innovative decision to acquire The Swapper3D™! As a fellow pioneer at the frontier of 3D printing technology, we're thrilled to join you on this exciting adventure. Before we start, please review these instructions thoroughly to ensure a seamless 3D printing experience.

The most important instructions are setting the servo positions. You must follow them exactly or damage to the Swapper3D could result. If you have any uncertainty then please create a post in the community forum. We will reply there.

Prusa i3 MK4 (Coming soon!)

Prusa i3 (up to MK3S+)

  1. Intro and safety guidlines
  2. Printed parts & firmware
  3. Update the printer to accept the Swapper3D (Prusa i3 MK3)
  4. Replace the x-end idler
  5. Assemble Arduino Controller
  6. Add controller to printer (Prusa i3 MK3)
  7. Wire the Arduino Controller
  8. Label the servos
  9. Set servo start positions
  10. Assemble Swapper3D main unit
  11. Add Tool Rotation
  12. Assemble Cutter Rotate
  13. Assemble Tool Height
  14. Assemble check Button
  15. Assemble Tool Holder Wheel
  16. Attach Swapper3D to Printer
  17. Assemble QuickSwap-Hotend
  18. Upgrade printer with QuickSwap-Hotend (Prusa i3 MK3)
  19. Add nozzles to inserts
  20. Calibrate the Swapper3D

Creality (Ender 3, CR10, etc)

  1. Intro and safety guidlines
  2. Printed Parts & Firmware
  3. Update the printer to accept the Swapper3D (Creality)
  4. Assemble Arduino Controller
  5. Add controller to printer (Creality)
  6. Wire the Arduino Controller
  7. Label the servos
  8. Set servo start positions
  9. Assemble Swapper3D main unit
  10. Add Tool Rotation
  11. Assemble Cutter Rotate
  12. Assemble Tool Height
  13. Assemble check Button
  14. Assemble Tool Holder Wheel
  15. Attach Swapper3D to Printer
  16. Assemble QuickSwap-Hotend
  17. Upgrade printer with QuickSwap-Hotend (Creality)
  18. Add nozzles to inserts
  19. Calibrate the Swapper3D

Leave a Reply

© BigBrain3D